Planet Audio AC2000.2 MOSFET Two-Channel Power Amplifier, 1000 Watts x 2 Max Power

Planet Audio AC2000.2 MOSFET Two-Channel Power Amplifier, 1000 Watts x 2 Max Power Review

Planet Audio AC2000.2 MOSFET Two-Channel Power Amplifier, 1000 Watts x 2 Max Power Feature

• 2000 WATTS MAX POWER
• Bridgeable Trimode Operation
• Input Sensitivity Selector
• Variable Bass Boost (0 to +1 8dB)
• Switchable Phase Shift (0-180º)

MOSFET Two-Channel Power Amplifier, 1000 Watts x 2 Max Power

AudioSource AMP 210 90-Watt Stereo 250-Watt Mono Power Amplifier (Black)

AudioSource AMP 210 90-Watt Stereo 250-Watt Mono Power Amplifier (Black) Review

AudioSource AMP 210 90-Watt Stereo 250-Watt Mono Power Amplifier (Black) Feature

• A/B Speaker Selector
• Bridgeable to 250 Watts @ 8 Ohms
• Auto Signal Sensing Power-On
• Front Panel balance and Volume Trim Controls, Independent Rear Panel Master Volume Controls
• 12VDC "Trigger-On", Rack Mountable (with kit)

Our company started designing and building amplifiers over 20 years ago. During this time, we've continually refined our products to balance power, sound clarity and long-lasting performance. The AudioSource AMP 210 delivers 90 watts of stereo power at <0.1% THD and 250 watts of mono power at <0.2% THD. All of our amps – AMP 102, AMP 110, AMP 210, and AMP 310 are rack-mount ready, full bandwidth capable, bridgeable for incredible mono power, and feature two zones of output with A/B or A+B speaker selection, providing a repertoire of flexible configurations. They boast a robust power supply and bipolar output devices. Front panel diagnostic LED displays show clipping to prevent over-driving your speakers. With second source override our amps automatically access secondary sources such as MP3 players, satellite radio, PA systems, paging, game consoles, phone calls or even doorbells. Speaker level inputs add another dimension to the usefulness of these fine amps; allowing for installation where only speaker wires are present to carry the signal information. For high power applications, the AMP 210 and AMP 310 are designed so users can set a safe maximum level using the rear panel master level controls, then make fine adjustments on the front panel. All AudioSource amplifiers are easy to install and are torture tested during development to ensure years of use. Our engineers are available to answer your questions about the set-up and use of all of our products- just call us! We answer every inquiry M-F 7am to 5:30pm PST. Experience you can trust, performance you can count on.

Lanzar Mxa224 1000 Watt Peak (About 300w Rms) 2 Channel Bridgeable High Power Mosfet Amplifier

Lanzar Mxa224 1000 Watt Peak (About 300w Rms) 2 Channel Bridgeable High Power Mosfet Amplifier Review

Lanzar Mxa224 1000 Watt Peak (About 300w Rms) 2 Channel Bridgeable High Power Mosfet Amplifier Feature

• 500W x 2 Outputs @ 2 Ohms
• 1000W x 1 Bridged Output @ 4 Ohms
• 2 Ohm Stable
• MOSFET Power Supply
• FULL/HPF/LPF X-Over Switch

Lanzar MXA224 1000 Watt peak (about 300w RMS) 2 Channel bridgeable High Power MOSFET Amplifier Features: 500W x 2 Outputs @ 2 Ohms 1000W x 1 Bridged Output @ 4 Ohms 2 Ohm Stable MOSFET Power Supply FULL/HPF/LPF X-Over Switch Variable Hi-Pass: 40 Hz-250 Hz Variable Low-Pass: 40 Hz-250 Hz Variable Input Level (Gain) Control: 6V-200mV Bass Boost Selector: 0/+18dB Thermal / Overload / Short Circuit Protection Soft Turn On/Off Power & Protection LED Indicator Low Level RCA Input: 10K Ohms Line Level RCA Output Frequency Response: 15 Hz-30K Hz Signal to Noise Ratio: >95dB THD:0.1 % 2x20 Amp Maxi Type Fuse Slim Size Amplifier Design for Easy Installation Dimensions: 10.63''W x 1.71''H x 9''L

AudioSource AMP 102 50-Watt Stereo 150-Watt Mono Power Amplifier (Black)

AudioSource AMP 102 50-Watt Stereo 150-Watt Mono Power Amplifier (Black) Review

AudioSource AMP 102 50-Watt Stereo 150-Watt Mono Power Amplifier (Black) Feature

• A/B Speaker Selector
• Bridgeable to 150 Watts @ 8 Ohms
• Auto Signal Sensing Power-On
• Front Panel Mounted Level and Balance Control
• 12VDC "Trigger-On", Rack Mountable (with kit)

Our company started designing and building amplifiers over 20 years ago. During this time, we've continually refined our products to balance power, sound clarity and long-lasting performance. The AudioSource AMP 102 delivers 50 watts of stereo power at <0.1% THD and 150 watts of mono power at <0.2% THD. All of our amps – AMP 102, AMP 110, AMP 210, and AMP 310 are rack-mount ready, full bandwidth capable, bridgeable for incredible mono power, and feature two zones of output with A/B or A+B speaker selection, providing a repertoire of flexible configurations. They boast a robust power supply and bipolar output devices. Front panel diagnostic LED displays show clipping to prevent over-driving your speakers. With second source override our amps automatically access secondary sources such as MP3 players, satellite radio, PA systems, paging, game consoles, phone calls or even doorbells. All AudioSource amplifiers are easy to install and are torture tested during development to ensure years of use. Our engineers are available to answer your questions about the set-up and use of all of our products- just call us! We answer every inquiry M-F 7am to 5:30pm PST. Experience you can trust, performance you can count on.

Pyle Pro PT210 120-Watt Microphone PA Mono Amplifier with 70-Volt Output

Pyle Pro PT210 120-Watt Microphone PA Mono Amplifier with 70-Volt Output Review

Pyle Pro PT210 120-Watt Microphone PA Mono Amplifier with 70-Volt Output Feature

• Power On/Off with LED Indicator - Front 3.5mm AUX CD Input Jack - Voltage Selector 110/220V - Phono/Aux Input Selector
• 1/4- Inches Phone Jack - MIC 1 Talkover - Removable AC Cord - Variety of Speaker Outputs Terminal
• LED Level Display - Phono/Aux Volume Control - Unswitched AC Outlet - Dimensions: 3 1/3- Inches H x 12 3/4- Inches W x 8 9/10- Inches D
• Master Volume Control - Mic 1 Mic 2 Volume Controls - Mix Bus Jacks
• High/Mid/Low Tone Controls - Mic 1 Mic 2 6.35mm Connectors - Phono/Aux/RCA Input Jacks

This 120-watt microphone amplifier takes your voice to the next level! The amplifier's wide frequency response makes it suitable for amplifying music or vocal program material. It can be used for live bands, office paging systems, public announcements, or a variety of other installations. It’s got two front ¼” inputs for mics, each with its own independent volume control and talkover. Plus, there’s two stereo RCA inputs on the back – including one that takes low level phono input from a turntable. The 3-band EQ (100 Hz, 1 kHz, 8 kHz) lets you tweak the sound to your exact requirements. This amp is compatible with 70 V PA systems too. An unswitched outlet on the back means you’ll never be looking for an outlet. Runs on 110 and 220 V.

Pyle Home PTA4 Mini 2x120 Watt Stereo Power Amplifier with AUX/CD Input

Pyle Home PTA4 Mini 2x120 Watt Stereo Power Amplifier with AUX/CD Input Review

Pyle Home PTA4 Mini 2x120 Watt Stereo Power Amplifier with AUX/CD Input Feature

• 2x120W RMS at 4-ohm - Blue LED Output Level Display - Power ON LED Indicator
• 3.5mm Aux CD/MP3 Input Jack - 1/4'' Phone Jack - MIC Volume Control
• Master Volume Control - Balance Control - Bass and Treble Tone Controls - Switchable AUX1/AUX2/CD and RCA Input - 1/4'' MIC Input Jack
• RCA REC Output - Four Push Type Speaker L/R Terminals - 110/220 Voltage Selector
• Dimensions:8.27''W x 2.72''H x 5.39''

Pyle PTA4 Home Amplifier is perfect for powering any stereo system. Complete with AUX/CD inputs, and 2 x 120 watts of power -- this simple to use and durable amp has bass and treble controls, a slick blue LED output level display, L/R RCA inputs, and 4 speaker outputs. Using sophisticated circuitry and premium components for uncompromising musicality -- this product is famous for delivering powerful and accurate sound. This small but powerful amp delivers clear and crisp audio for it listener. Durable and affordable, this amp is made to last.

Monster Cable MPC P400 Bap1500 1500 Watts 400 Series 1/0 Gauge Amplifier Power Kit

Monster Cable MPC P400 Bap1500 1500 Watts 400 Series 1/0 Gauge Amplifier Power Kit Review

Monster Cable MPC P400 Bap1500 1500 Watts 400 Series 1/0 Gauge Amplifier Power Kit Feature

• Premium high power kit with fusing and accessories to install one amplifier with total power of 1500 watts
• PowerFlexTM blue and silver cable is flexible and makes installation simple
• Excellent power transfer through Magnetic flux tube
• Includes fusing and accessories to install a single amplifier

Brand New Monster Cable MPC P400 BAP1500 1500 watts 400 Series 1/0 Gauge Amplifier Power Kit Features: Premium high power kit with fusing and accessories to install one amplifier with total power of 1500 watts PowerFlexTM blue and silver cable is flexible and makes installation simple Excellent power transfer through Magnetic flux tube Includes fusing and accessories to install a single amplifier

Sound Storm Laboratories EV2.200 200 Watts 2-Channel Power Amplifier with High/Low Crossover

Sound Storm Laboratories EV2.200 200 Watts 2-Channel Power Amplifier with High/Low Crossover Review

Sound Storm Laboratories EV2.200 200 Watts 2-Channel Power Amplifier with High/Low Crossover Feature

• Low pass crossover 120Hz (fixed)
• Variable input gain control
• Power and protection LED indicators
• Line and speaker level inputs
• Chrome plated RCA connectors and screw terminals
• Max power 2 ohm 100W X 2RMS power 4 ohm 50W X 2
• Low pass crossover 120Hz (fixed) Variable input gain control
• Signal-to-noise ratio 90dbTHD at RMS output 0.01%Damping factor 125+

Charles Darwin generated a lot of controversy with his theory of evolution. Although his theories were well respected in the scientific community, they met with opposition from some in the general public. Sound Storm Laboratories' EVOLUTION is a series of stylish, efficient, high performing amplifiers that are as exciting and well respected as Darwin's theory, but without all of the controversy. SSL EVOLUTION is loved by scientists and non-scientists alike. The efficient power output of the SSL EVOLUTION IC amplifiers makes them a natural selection for those wanting a clean sound. EVOLUTION IC amplifiers allow the user to power a combination of tweeters, full range speakers and subwoofers in order to tune their vehicle's sound system to their exact preference specifications. The two ohm stable EV2.200 provides 200 watts of peak power. It comes standard with a fixed low pass crossover (120Hz), variable input gain control, power and protection LED indicators, and line and speaker level inputs. EVOLUTION IC amplifiers also feature chrome plated RCA connectors and screw terminals and a small footprint that allows the user to employ them in tight spots. Frequency response is 12Hz to 22kHz (+/-3dB). For technical questions about this product please visit our website, soundstormlab.com, or call a technician at 888.38.STORM. Let us prove to you that when it comes to building an impressive and affordable home-quality theater in your vehicle, Sound Storm is your mobile entertainment solution…and everything else is just noise.

Wilson Replacement Ac/Dc Power Supply 6V For Amplifiers 859912

Wilson Replacement Ac/Dc Power Supply 6V For Amplifiers 859912 Review

Brand New Wilson 6V Amplifier AC/DC Power Supply Wall Charger

Model # 859912

This Wilson Electronics accessory is aAC/ DC 6V power supply for use with Wilson Wireless Smart Technology Amplifiers.
*Not compatible with older amplifiers

AC Outlett Wall Plug

Compatible With:

• 801201 - In-Vehicle Wireless Dual-Band Repeater

Enrock EKM008A 4-Channel 800 Watt Waterproof MP3/iPod Marine Boat Power Amplifier

Enrock EKM008A 4-Channel 800 Watt Waterproof MP3/iPod Marine Boat Power Amplifier Review

Enrock EKM008A 4-Channel 800 Watt Waterproof MP3/iPod Marine Boat Power Amplifier Feature

• 4 X 100 Watts RMS at 4 Ohms - 4 x 200 Watts Max at 4 Ohms
• Electronic Crossover Network 2 Ohms Stereo Stable Anti-Thump Turn-On Soft Turn On/Off
• Adjustable High Low Level Inputs RCA Line Input Power Protection Circuitry Volume Gain Remote Control
• T.H.D: 0.05% S/N Ratio: 95dB Channel Separation: 65dB Frequency Response: 10Hz-40kHz Fuse: 10A
• Dimensions: 6.10"L x 3.35"W x 1.38"H - Accessories: iPod/MP3 Waterproof 3.5mm Stereo to RCA Adaptor Remote Control for Volume Gain

This 4-channel waterproof MP3/iPod marine amplifier is a powerful addition to your marine audio setup. It pushes 200 watts maximum on each of the 4 channels for a bone-rattling power that's basically unmatched. It takes RCA line inputs and includes a 3.5mm-to-RCA adaptor so you can plug in your MP3 player or iPod easily. Also takes standard high and low level inputs from a marine head-unit. Comes with a wired remote control for volume gain. For safety, this amp is equipped with power protection circuitry and soft turn on/off prevents damage to your speaker equipment. MP3 Player or Receiver Ready The PEKM008A takes RCA line inputs and includes a 3.5mm-to-RCA adaptor, so you can plug in your MP3 player or iPod easily, for a quick and easy music solution. It also takes standard high- and low-level inputs from marine head units, so it can be used for system expansion. A simple two-way switch gets your input level set up for either option. Protection Circuitry For safety, this amp is equipped with power protection circuitry. An anti-thump turn-on and soft turn-on prevent any damage to your speakers. Remote Included This amplifier also includes a wired remote control, for adjusting volume gain. What's in the Box Enrock EKM008A Four-Channel Waterproof MP3/iPod Marine Power Amplifier, Waterproof 3.5mm Stereo to RCA Adaptor, Remote Control for Volume Gain, Documentation

Power Acoustik D4-1000 Demon 4-Channel 1000-Watt Max Car Amplifier

Power Acoustik D4-1000 Demon 4-Channel 1000-Watt Max Car Amplifier Review

Power Acoustik D4-1000 Demon 4-Channel 1000-Watt Max Car Amplifier Feature

• Regulated PWM MOSFET Power Supply, Extruded Aluminum Chassis, Brushed Aluminum Finish with Red Anodizing
• 00mV-6V Low Level Inputs and High Level Inputs
• 4 ga. Power & 8 ga. Speaker Terminals with 2-Ohm Stable Class A/B Full Range Outputs
• Variable 12dB Hi/Low/Subsonic Crossovers, Variable 18dB Bass Boost, 180 degree Phase Switch
• Dash Mount Remote Gain Module, Tri-Mode Capable, Three-Way Protection Circuitry

1000 watts max total into 4 channels, 110 X 4 into 2 Ohms RMS. Music so powerful it makes the dead come to life! Try the all new Demon amplifiers, loaded with the features you expect on models priced much higher than this exquisite series of amplifiers.

POWER ACOUSTIK D1-6000D Demon 6000 Watt Mono Bass Amp

POWER ACOUSTIK D1-6000D Demon 6000 Watt Mono Bass Amp Review

POWER ACOUSTIK D1-6000D Demon 6000 Watt Mono Bass Amp Feature

• MOSFET PWM Power Supply: Metal Oxide Semi-conductor Field Effect Transistors with Pulse Width Modulated circuitry make up each DEMON amplifiers power supply. MOSFET transistors increase durability and longevity over bi-polar counterparts.
• Variable 12dB Crossovers: Filter out frequencies that could cause damage to speakers, or that subwoofers can't play via 12dB/octave slope high pass, low pass and subsonic crossovers.
• Dash Mount Remote Gain Control: Mono Bass DEMON amplifiers include a dash mount remote gain control. The remote gain control allows amplifier level adjustment from a remote location in the vehicle.
• Variable 18dB Bass Boost: All DEMON series amplifiers feature an 18dB 45Hz parametric bass boost. Mono Bass models offer variable boost level adjustment to match the limitations of your subwoofers.
• 1-Ohm Stable Class D, w/ 200mV-6V Low Level Inputs & High Level Inputs, 180 degree Phase Switch, Three-Way Protection Circuitry, Pre-Amp Outputs, 4 ga. Power & 8 ga. Speaker Terminals, Extruded Aluminum Brushed Finish w/ Red Anodizing

Music so powerful it makes the dead come to life. Try the all new Demon amplifiers, loaded with the features you expect on models priced much higher than this exquisite series of amplifiers. We provide all the necessary features, including variable 12dB Crossovers and 1-ohm stable on the mono bass amps. . Bass boost and dash mounted sub woofer control. Sporting a new hairline anodized Candy Apple finish with Skull logo and piercing eyes that light-up when the amp is turned on.

Boss Audio R3002 2-Channel Mosfet Power Amplifier with Remote Subwoofer Level Control

Boss Audio R3002 2-Channel Mosfet Power Amplifier with Remote Subwoofer Level Control Review

Boss Audio R3002 2-Channel Mosfet Power Amplifier with Remote Subwoofer Level Control Feature

• 300 Watt
• 2-Channel
• Remote Subwoofer Level Control

2-Channel Mosfet Power Amplifier with Remote Subwoofer Level Control, 600 Watts, 10 7/16 Inch Width x 2 1/4 Inch Height x 9 5/32 Inch Length, Features Blue Illuminated Boss Logo

Rockford Fosgate RFK4 4 AWG Power Only Amplifier Install Kit

Rockford Fosgate RFK4 4 AWG Power Only Amplifier Install Kit Review

Rockford Fosgate RFK4 4 AWG Power Only Amplifier Install Kit Feature

• Rockford Fosgate Power Kits feature full AWG (American Wire Gauge)
• 100% oxygen free copper
• All brass parts are manufactured using the highest quality of standards
• All kits include the appropriate wire termination hardware

Rockford Fosgate Connecting Punch 4 AWG Power Only Amplifier Install Kit. 17 feet of 4 AWG power wire, 3 feet of 4 AWG ground wire, Maxi fuse holder, 60 Amp fuse included. Power kits feature full AWG (American Wire Gauge), 100% oxygen free copper. All brass parts are manufactured using the highest quality standards. This ensures that your accessories deliver total performance. All kits include the appropriate wire termination hardware. Visit www.RockfordFosgate.com 24 hours a day for technical support or call (800)669-9899 M-F 7 am to 5 pm MST.

Pyle Home PT610 19-Inch Rack Mount 600-Watt Power Amplifier/Mixer with 70V Output

Pyle Home PT610 19-Inch Rack Mount 600-Watt Power Amplifier/Mixer with 70V Output Review

Pyle Home PT610 19-Inch Rack Mount 600-Watt Power Amplifier/Mixer with 70V Output Feature

• 5 Channel Mixer - Front 3.5mm AUX CD Input Jack - MIC 1 Talkover - Ground Screw
• 4 Mic Inputs XLR & 1/4'' Combo Jack - 4 ohm, 8 ohm, 16 ohm & 70V Screw Terminals - Headphone Output - 2U Rack Mountable
• 2 Line Inputs RCA - 8 ohm 1/4'' and Binding Post Outputs - Rotary Channel & Master Level Controls - 110/220 Voltage Selector
• CH4 Mic/Line Switchable - Illuminated VU Output Level Meter - Thermal Overload Protection w/ Indicator - Dimensions: 4 3/16''H x 19.0''W x 12''D
• Effects Loop RCA In/Out - Feedback Filter with Rotary Control - Clip LED Indicator - Weight: 22.3 lbs

This rack-mountable, 5-channel power amplifier has power – 600 watts! On the back, it’s equipped with 4 mic inputs, each of which can take balanced XLR or ¼” jack inputs – and a rotary-controlled filter prevents excessive feedback. It also has 2 RCA line inputs – so you can connect another source like a CD or MP3 player. This amp is also compatible with speakers of various impedance – it has screw terminals for 4, 8, and 16 ohm speakers, as well as an 8 ohm binding post output. The in/out effects loop allows you to process your signal using an external device. On the front, an illuminated VU meter provides signal levels. A headphone jack lets you hear your mix in private. The PT610 has thermal overload protection with indicator, so you know your sound is secure. Runs on 110 and 220 V.

Brand New Boss Armor R4000D Monoblock 4000 Watt "Class D" Car Audio Power Amplifier with with Strapping Capability to Connect Two of The Same Amps for Double Power

Brand New Boss Armor R4000D Monoblock 4000 Watt "Class D" Car Audio Power Amplifier with with Strapping Capability to Connect Two of The Same Amps for Double Power Review

Brand New Boss Armor R4000D Monoblock 4000 Watt "Class D" Car Audio Power Amplifier with with Strapping Capability to Connect Two of The Same Amps for Double Power Feature

• Boss Armor R4000D Car Audio Power Amplifier + Remote
• Total Power: 4000 Watts
• Max Power @ 1 Ohm: 4000 Watts x 1 Channel
• Max Power @ 2 Ohms: 3000 Watts x 1 Channel
• RMS Power @ 4 Ohms: 1600 Watts x 1 Channel

Brand New Boss Armor R4000D Monoblock 4000 Watt "Class D" Car Audio Power Amplifier with with Strapping Capability to Connect Two of The Same Amps for Double Power Features Boss Armor R4000D Car Audio Power Amplifier + Remote Total Power: 4000 Watts Max Power @ 1 Ohm: 4000 Watts x 1 Channel Max Power @ 2 Ohms: 3000 Watts x 1 Channel RMS Power @ 4 Ohms: 1600 Watts x 1 Channel Speaker Impedance: 1 Ohms Master/Slave Switch Soft Turn-On Circuit Power & Protection LEDs Thermal Overload & Speaker's Short Protection Number of RCA Line Output: 2 Strapping Capability Remote Subwoofer Level Control Input Sensitivity Selector Amplifier Class: Class D Technology: Digital Number of Output Channels: 1 Frequency Response: 15 to 150 Hz Total Harmonic Distortion (THD) @ RMS Output: 0.01% Signal-to-Noise Ratio (SNR): 105 dB Variable Low Pass Crossover: 50 to 150 Hz Dimensions: 2.5625" x 14.3125" x 6.5"

MRP-F300 - Alpine 4-Channel 300 Watt V-Power Series Amplifier

MRP-F300 - Alpine 4-Channel 300 Watt V-Power Series Amplifier Review

MRP-F300 - Alpine 4-Channel 300 Watt V-Power Series Amplifier Feature

• 4-Channel car amplifier
• 50 watts RMS x 4 at 4 ohms (75 watts RMS x 4 at 2 ohms)
• 150 watts RMS x 2 bridged output at 4 ohms (4-ohm stable in bridged mode)
• 10-11/16"W x 2-7/16"H x 9-9/16"D

Power up your system with Alpines V-Power amplifiers! This best selling family of amplifiers offers more choices for building the right system for you, and provides flexibility and value in an aggressive design. Alpine continues to bring you mind-blowing sound performance only the best - so you get the sound you deserve.

RMS Power (at 14.4V, 20Hz-20kHz)

Per channel into 4 ohms: 50W x 4 (1% THD)

Per channel into 2 ohms: 75W x 4

Brigded 4 ohms: 150W x 2

Best Dollar-Per-Watt performance

The Perfect Upgrade Choice

Sleek Aggressive Design